TL;DR: Layer height is how thick each printed layer is.3 Smaller layers improve surface finish and detail, while larger ones reduce print time but leave visible lines.3 For most everyday prints, a 0.2 mm layer height strikes a great balance between detail and print speed.4
For most everyday prints, 0.2 mm strikes a good balance between detail and print speed.4 With a standard 0.4 mm nozzle, polylactic acid (PLA) gives dependable results anywhere from 0.1 mm to 0.3 mm.4 Thinner layers buy detail, and thicker layers buy time.3
3D printing is also called additive manufacturing.2 This guide covers fused deposition modeling, or FDM, using PLA and rPETG (recycled polyethylene terephthalate glycol, or PETG) filament. Layer height is the thickness of each printed slice, and the smaller it is, the more layers your print needs.3
Layer Height Basics
Layer height only changes the resolution in the vertical (Z) direction.3 Precision along the horizontal X and Y axes (XY), meaning the accuracy across the flat plane, comes from the nozzle diameter and motion accuracy.3
The nozzle is the opening that melted plastic flows out of. So if a flaw shows up side to side, look at nozzle size or motion before you shrink your layers.
Layer height directly affects print quality, speed, and strength.4 The right choice depends on the material and your project goals.4 Thinner layers give smoother results but take much longer.3
Steps to Choose Layer Height
- Name the job. Ask what the part must do: look good, fit another part, or just prove a shape. Display pieces justify slow, thin layers. Test fits do not.
- Consider 0.2 mm first. This is the usual balance point between detail and print speed.4 The most common FDM layer height is also described as a good balance of quality and speed.5
- Go thinner for detail. Smaller layer heights improve surface finish and detail.3 The price is time, since the thinnest layers take much longer.3 Save them for visible faces and small features.
- Go thicker for speed. Larger heights save time but show visible ridges, the classic stair-stepping look.3 Use them for drafts, fit tests, and parts nobody will see.
- Check strength. Layer height changes how strong your print comes out.3 If a test part splits between layers, work on layer adhesion, meaning how well each layer bonds to the one below, using the cooling tip further down.
- Compare and save. Print one small test at two layer heights and hold the pieces side by side. Save the winner as a named profile in your slicer, the program that prepares the model for printing.
Weighing Detail, Speed and Cost
Think of print time as the price tag. Larger layer heights reduce print time, and smaller ones need more layers.3
Print a draft at 0.3 mm to check the fit, since a layer height between 0.1 mm and 0.3 mm delivers dependable results in PLA on a standard 0.4 mm nozzle.4 Then use 0.2 mm for the final part, which strikes a balance between detail and print speed.4
Keep the thinnest settings for the one version that matters. You pay the long print time once, on the part people will actually look at.
PLA and rPETG Tips
The right layer height depends on the material, so test each filament instead of copying settings across.4
You can improve layer adhesion in FDM prints for both PLA and rPETG with a few settings changes.1 One adjustment is the part-cooling fan, which blows air onto freshly printed plastic. Lower it gradually, in 10–20% increments, and test a small tower before committing to a full print.1
Mistakes to Avoid
- Shrinking layers to fix a side-to-side flaw. Layer height only changes vertical resolution.3
- Ignoring how much longer thin layers take. Save fine layers for parts that earn the extra hours.
- Skipping the test. Run a small tower before a full print when you change cooling.1
- Changing many settings at once. Change one setting per test so you know what worked.
Next Steps
Take your next part and consider it at 0.2 mm, where detail and print speed balance for most everyday prints.4 Then consider the same file at 0.1 mm, where smaller layers mean more layers and a much longer print.3 The gap between those numbers, in hours, is your detail-versus-speed trade-off for that part.