Practical FDM: How to Strengthen Printed Parts

Man working with 3D printer and toys
Photo by Snapmaker 3D Printer on Unsplash

Want to strengthen FDM printed parts? Check these four areas, in this order:

  • Review the design for the common mistakes that lead to weak parts.2
  • Pick polylactic acid (PLA) or rPETG (a recycled, heat-tolerant filament) once you know each material's limits.1,3
  • Choose a layer height, then tune cooling and speed.3
  • Calibrate your printer step by step.4

Why Practical FDM Is Worth Getting Right

Fused deposition modeling (FDM) is one of the most cost-effective 3D printing technologies.2 It is popular for prototyping, functional testing and small-scale production.2

The most common design mistakes can lead to print failures, weak parts, or excessive material use.2 So a little checking up front pays off.

To strengthen FDM printed parts, review the design, choose the right filament and tune the settings in your slicer. The slicer is the software that prepares a model for printing. Then calibrate the printer and test the fit before you print the final part.

Step 1: Review Your FDM Design Before Slicing

These tips come from a head of sales engineering who has worked with 3D printing since 2010 and reviewed countless FDM projects.2 The aim was to share key tips for stronger, more efficient designs.2

Check your model for those common mistakes before you slice. They can cause print failures, weak parts or wasted material.2

Step 2: Choose Between PLA and rPETG

PLA is polylactic acid. rPETG is a recycled, heat-tolerant filament.3

The choice between PLA and rPETG becomes straightforward once you know each material's limits.1 Decide separately for functional parts and display parts.1

Annealing PLA: What to Expect

Annealing a PLA print makes it a bit more resistant to heat warping, but it shrinks the part.3 Allow for that shrinkage if the part must fit something else.

Step 3: Tune Layer Height, Cooling and Speed in Your Slicer

Pick a layer height in your slicer, the software where you set print options. Then tune cooling and speed so prints keep strong layers and sharp detail.3

A layer height also balances fine detail against print time.3 Think about which matters more for the part in front of you.

Step 4: Calibrate Your Printer and Test the Fit

A step-by-step calibration of your 3D printer aims at precise, consistent prints.4

If a model is too big for your printer bed, split it into smaller parts.3 Then test the fit first.3

Know the Limits of Practical FDM

FDM printing speed is limited compared with some industrial processes. That makes it less ideal for large-scale serial production.2

When you need higher quantities, better repeatability or faster production speeds, industrial processes are more suitable.2

Industrial FDM also exists. One reseller of industrial 3D printing equipment in the United Kingdom and Ireland lists high-temperature industrial FDM for functional and end-use parts.5

Next Step: Print a Test Before the Full Batch

Planning workshop tooling? A plain comparison of two common plastics, with a decision table, covers which filament suits printed jigs and fixtures.3

Run one test print with your chosen filament and layer height, and check the fit before you print the full batch.

Sources / References

  1. PLA vs rPETG: Functional & Display Parts FDM Guide (fast3dprint.eu) ↩
  2. FDM 3D Printing Design Tips: Best Practices and... | Xometry Asia (xometry.asia) ↩
  3. Fast3DPrint Blog — 3D Printing Guides & Tips (fast3dprint.eu) ↩
  4. Настройки печати PETG: температура, скорость и ретракция (crealitycloud.com) ↩
  5. AM Futures | Industrial 3D Printing Equipment Reseller, UK & Ireland (am-futures.com) ↩