TL;DR: Set your layer height in the slicer's process preset, where slicing normally gives one uniform height across the model.1 If layers separate, turn the cooling fan down slightly.2 On slender, detailed parts, slow the print down.6
Layer Height Basics
Layer height is the thickness of each plastic layer your printer deposits. You pick it in your slicer, the program that prepares a model for printing.
In fused deposition modeling (FDM) printing, the bond between deposited layers determines whether a finished part holds up under stress.2
According to the Bambu Lab wiki, once you set the print height in the process presets, slicing normally gives a model with uniform height.1 If one value does not suit the whole model, look for a variable layer height option in your slicer.
Choosing Layer Height Step by Step
- Calibrate the printer. Calibrating a 3D printer step by step is a route to high-quality prints.5 Do this before you compare layer heights, so any difference you see comes from the setting itself.
- Set the height in your process preset. Slicing then normally gives one uniform height across the whole model.1
- Print a small test piece. Include a thin feature and a flat surface. Inspect both before you change anything.
- Check layer bonding. If layers separate, reduce the cooling fan speed slightly, which can improve bonding strength, especially with polyethylene terephthalate glycol (PETG), a common filament type.2 Slower cooling gives each new layer more time to fuse thermally with the layer beneath it before solidifying.2
- Adjust one setting at a time. That way you know which change helped.
Polylactic Acid (PLA) and Recycled PETG (rPETG)
PLA and recycled PETG (rPETG) respond differently to adhesion-focused tuning.2
PLA tolerates a wider range of cooling settings than engineering-grade filaments, which gives you more margin for experimentation.2 PETG is more sensitive to rapid temperature drops, so turning down the part-cooling fan is particularly impactful for that material.2
In practice, test fan changes on rPETG in small steps. With PLA, you have more room to experiment.
Fine Details and Thin Parts
Slender limbs on miniatures are a known struggle for FDM printing.6 To improve layer bonding, reduce the printing speed or modify the infill settings, which control the pattern inside the part.6
For professional-looking results on that kind of part, the advice is to move to stereolithography (SLA) printers.6 That is a different printing process from FDM.
Quick Checklist
- Calibrate the printer before comparing settings.5
- Set the height in the process preset, and check for a variable layer height option if one value does not fit the model.1
- Lower the fan slightly if layers bond poorly, especially on rPETG.2
- Slow the print down on slender features.6
Next print, run the same small test piece twice: once at your current fan speed and once slightly lower. Compare how well the layers fuse, then keep the better setting.