Practical FDM: Design Printed Enclosures for Electronics

A close up of a metal object with a black background
Photo by Efe Yağız Soysal on Unsplash

TL;DR: For a practical FDM enclosure, fix design mistakes first.2 Then choose between polylactic acid (PLA) and rPETG, a recycled version of a more durable, heat-tolerant filament (PETG).2 The choice often comes down to the requirements of the project.1 Finish by tuning layer height, calibrating your printer and testing the fit.2

Want a stronger printed part? Fix design mistakes, choose PLA or rPETG, tune layer height, then calibrate your printer and test the fit.2 Follow that order for your next electronics enclosure.

This practical FDM guide covers each step. FDM, or fused deposition modeling, is a printing method in which a printer melts plastic thread, called filament, and lays it down in layers.3

Practical FDM Workflow for Electronics Enclosures and Housings

Here is the workflow, from fixing design mistakes in your model to calibrating your printer and testing the fit.2

1. Fix Design Mistakes in Your Model First

Fixing design mistakes comes first when you strengthen a printed part.2 Do it in your model, before you print anything.

Measure your board, ports and mounting points, then model the housing around them. Everything else in this workflow builds on that model.

2. Choose PLA or rPETG for Your Housing

Many newcomers to 3D printing ask whether to pick PETG or PLA, and both offer important benefits.1 The choice often comes down to the requirements of the project.1 So write down what your housing needs, then choose.

rPETG is a recycled version of a more durable, heat-tolerant filament (PETG).2 PLA and PETG sit among the three main FDM filaments, a group that covers 90% of everyday maker needs.3

Annealing makes PLA prints a bit more resistant to heat warping, but it shrinks them.2 If you anneal, test your lid and base together afterward.

3. Dial In Print Settings on a Test Piece

PETG print settings include temperature, speed and retraction, which is the printer pulling filament in.4 Dial these in on a small test piece before you print a full housing.

4. Tune Layer Height for Strong Layers and Sharp Detail

Pick a layer height in your slicer software, then tune cooling and speed so prints keep strong layers and sharp detail.2

That follows the order from the overview above: design first, then material, then layer height.2

5. Split Large Models to Fit Your Printer Bed

Split an oversized model so it fits your printer bed, and test the fit first.2

A housing that is too big for your bed needs this step before you print.

6. Calibrate Your Printer and Test the Fit

Calibrating a 3D printer is a step-by-step process.4 Once it is done, test the fit.2

Buying Filament for Printed Enclosures

eSUN is a 3D printer material brand that offers PLA, PETG, carbon fiber and glow-in-the-dark filaments, among others.6 It also sells bundles and large spools.6

An online shop for 3D printer plastics (REC) lists a wide selection for FDM printers.5

Quick Checklist for Printed Enclosures and Housings

Run through this list before you start your next print.

  • Fix design mistakes in your model.2
  • Choose PLA or rPETG based on what the project requires.1
  • Dial in temperature, speed and retraction on a small test piece.4
  • Pick a layer height, then tune cooling and speed.2
  • Split oversized models so they fit your printer bed.2
  • Calibrate your printer.4
  • Test the fit.2

Before You Print

Print the tight spots first, such as the lid edge and the port cutouts, and test the fit first.2

Practical FDM Enclosure FAQ

What is FDM?

FDM is a printing method in which a printer melts plastic thread, called filament, and lays it down in layers.3 The steps in this guide are written for printers that work this way.

Should I use PLA or rPETG for an electronics housing?

It often comes down to the requirements of the project.1 rPETG is a recycled version of a more durable, heat-tolerant filament, so write down what your housing needs before you pick.2

What are the main PETG print settings?

They include temperature, speed and retraction, which is the printer pulling filament in.4

Does annealing help PLA?

Annealing makes PLA prints a bit more resistant to heat warping, but it shrinks them.2 Test your lid and base together afterward.

What should I print first?

Calibrate your printer, then test the fit.2 Start with the tight spots, such as the lid edge and port cutouts, and test the fit first.2

Sources / References

  1. PETG vs PLA: Key Differences, Strength, and How to Choose (wevolver.com) ↩
  2. Fast3DPrint Blog — 3D Printing Guides & Tips (fast3dprint.eu) ↩
  3. Пластиковая алхимия: Большой гид по филаментам для... | Дзен (dzen.ru) ↩
  4. Настройки печати PETG: температура, скорость и ретракция (crealitycloud.com) ↩
  5. Пластик для 3D принтера купить с доставкой | REC (rec3d.ru) ↩
  6. 3D Printing Materials Top 3D Printer Material Brand-eSUN (esun3d.com) ↩